|
 
The Multi-Torq family of accessories is designed to expand the functionality of the Kolver PLUTO DC Electric Screwdriver and EDU1AE Controller by enabling easy access to multiple torque settings with one EDU1AE controller. Three levels of Multi Torque control are available.
The EDU1AE Controller for the PLUTO offers complete control over RPM ramp - the speed of acceleration at the beginning of the joint run down; Run down speed - the speed at which the screwdriver runs at full speed; Break time - the speed of deceleration at the end of the joint; Final torque between 1”15 Nm; and an optional reverse time after the final torque is met. Multi-Torq accessories expand the EDU1AE functionality to include Multiple Torque settings. Multi-Torq Controller
EDU1AEPLC/CC Screwdriver ControllerThe model EDU1AEPLC/CC Multi-Torq Controller is designed to expand the functionality of the PLUTO screwdriver and EDU1AE controller by enabling easy access to multiple torque settings with one EDU1AE controller and one Pluto driver only. Go To Product Page Multi-Torq Accessories
Dual Torque: DT1The Model DUAL-torque: DT1 plugs and plays with the EDU1AE/C/DT controller when connected to the control box, enabling the device to change between two torque settings with the swipe of a finger. The unit can sit on top of the controller or be placed in a convenient location on the work surface.GoTo Product Page 
HyperTorqueThe HyperTorque plugs and plays with the EDU1AE PLC/CC controller when connected to the control box, enabling the device to change between eight torque settings with the touch of a hyperlink in any Microsoft word document. Go To Product Page 
Eight Torque Selection SwitchThe eight-torque selection box: plugs and plays with the EDU1AE PLC/CC controller when connected to the control box, enabling the device to change between eight torque settings with the touch of a button. Go to Product Page 
Eight Torque Bit BlockThe eight-torque bit block: plugs and plays with the EDU1AE PLC/CC controller when connected to the control box, enabling the device to change between eight torque settings by the removal of a bit. Go To Product Page 
Smart BinThe Smart-Bins: plug and play with the EDU1AE PLC/CC controller when connected to the Smart-Control Box, enabling the device to change between torque settings when screws are picked from the bins. Go To Product Page 
Smart-ArmWhen the assembly to be screwed together is held in a fixture, so that it is in the same location every time, the Smart-Arm allows for different torque settings to be automatically called up based on the location of the screw. Go To Product Page 
Smart StringThe Smart-String plugs and plays with the EDU1AE PLC/CC controller when connected to the Smart-Control Box, enabling the device to change between torque settings based on the location of the screwdriver. Unlike the Smart-Arm the Smart-String takes up no space in your work area. Go To Product Page |
