Electric Screwdrivers and more!

10 to 100 in/lbs Rotary Transducer

Rotary Transducers are an alternative to traditional static torque testers. One end of the rotary transducer is plugged directly into your torque driver. The other end has the screwdriver bit for the fastener being used in the joint. This allows real time transmission of torque and time data to come directly from your joint instead of from a joint simulator on a off-line static transducer in your torque tester. The result is data that can be directly related to your actual screw tightening process, not a simulation.

Specification:

• Output at rated capacity: 6 Nm [53 lbf.in] rated torque 2 mV/V
• Interchangeability: Matched for mv/v and shunt calibration +0.3% FS
• Nonlinearity: +0.2% FS
• Excitation recommended: 10V DC or AC RMS
• Bridge resistance: 350 ohms
• Usable temperature range: 41-122º F
• Mating connector: Bendix PTO6A-10-65(SR)
• Safe overload: 125% of rated out put
• Bi-directional

Items that ship with this unit:

1. Rotary Transducer
2. Interface cable to Kolver K-Series torque tester

*Will be replaced by the KTE5 and KTE25 External Rotary Transducers