Electric Screwdrivers and more!

Torque Range: 0.9 to 6 in/lbs

The BRL07AS is a Current Control "Clutchless" Screwdriver with a Brushless DC motor.  Brushless DC motors have several advantages as compared to standard motors using Carbon Brushes.

Why Brushless:

• Higher RPM:  The standard equivalent model FAB03 runs at a max of 650 RPM a full 50% slower than the BRL07AS.  Because Brushless motor commutation is accomplished electronically, brushless DC motors are capable of very high speeds and torque without arcing.
• Higher Duty cycles:  Brushless motors have a lower thermal resistance and are capable of operating in a wider temperature range.
• Sophisticated motion control capabilities:  The lack of brushes allows the BRL Series to have a broad closed-loop speed range. Also, brushless motors have a higher torque to inertia ratio, high starting energies, and high breakaway torques.
• Small and lighter:  Because they have lower thermal resistance, are capable of operating in wider temperature ranges, have higher torque to inertia ratios, and have greater acceleration, smaller brushless DC motors can do the same job that their much larger counterparts would otherwise be used for. This results in an overall cost reduction.
• No brushes means a maintenance reduction and no brush residue contamination to bearings or the environment. There is no arcing associated with brushes, and therefore, are safer in explosive environments. Brushless DC motors are also safer in contact with fluids than brush DC motors.
• Quieter:  Because there is no brush arcing or brush commutation, brushless motors are much quieter both electrically and audibly.

The BRL series operates by setting a torque, speed and ramp on a controller, then validating the resulting torque on a torque tester or rotary transducer.  The controller, purchased separately, is required for this tool to operate.  Choose a Controller from the list below. The EDU1BR is the standard unit. The EDU1BR/SG offers the same functionality with the addition IO for expanded control

Items that ship with this unit:

• Screwdriver with ESD-safe body
• 8 ft controller connection cable
• Suspension bail

NOTES:

1. The heavy-duty cables and connectors, developed for robotic applications, are made of antistatic dissipative material for a safe use in ESD environment.
2. The ESD housing is certified to SP method 2472 (Ericsson approved)