Electric Screwdrivers and more!

The EDU1AE/LTP: FOR THREAD CUTTING

This system allows parameters to be set up to control the torque and RPM profile for one program. The system is set up through a LCD display on the front of the unit. Changes to the parameters are preformed by scrolling through the settings usingf four buttons.

The Torque Level is set as a percentage of the tools torque range. After you choose a torque level percentage, the resulting torque must be validated back to an external transducer or torque tester. The stiffness of your joint will have an impact on the resulting torque. For this reason you must know how much rotation is in the tightening portion of your joint and the corresponding settings for Hard or Soft joint should be set accordingly. See our blog or call us for details.

In addition to the parameters found standard in the EDU1AE V2.1 the 2.2 Version offers high prevailing torque capability during the Delay Time setting. When the Delay Time parameter is set to any value other than zero the unit is running at the full torque capacity and factory set RPM level of the tool connected to the controller for that time period. During the Delay Time the torque output of the screwdriver is not limited in any way. Please take special care when setting the Delay Time Parameter.

Features:

• One controller only for a torque range from 2 to 15 Nm
• RPM control for slow start, run down speed and slow speed tightening
• Soft or hard joint parameter settings
• Automatic reverse at cycle end possible
• Autostop on elapsed time
• Driver on (trigger start) and off (torque reached) outputs
• Start and reverse inputs
• Low noise level, only 55 dBA, low weight, only 0.5 kg

Specification by screwdriver model and joint type:

Items that ship with this unit:

• 110V AC power cord