PR1 Series: Rail Supported Arms

Maximum Torque 50 Nm (443 in/lbs)

Shop À la carte and configure a PR1 arm to fit your specific needs.

The PR1 rail supported arm is the most powerful arm of this type and has a very versatile design.

The rails for the PR1 arm and smaller PR2 arm are the same. This has the advantage that if necessary both sizes of arm can be mounted on the same rail unit. The extension tube can be mounted at the required height. The weight of the tool is supported by gas springs.

PR1_application

 

PR1-0500-0102

PR1-0500-0102 Rail Supported Arm

  • Load Capacity: 2.2-4.4 lbs / Torque: 50Nm (443 in/lbs)
  • Reach from rail: +/- 500 mm or 20 in
  • Recommended vertical stroke: 9.8 inches

PR1-0500-0204

PR1-0500-0204 Rail Supported Arm

  • Load Capacity: 4.4-8.8 lbs / Torque: 50Nm (443 in/lbs)
  • Reach from rail: +/- 500 mm or 20 in
  • Recommended vertical stroke: 9.8 inches

PR1-0500-0405

PR1-0500-0405 Rail Supported Arm

  • Load Capacity: 8.8-11.0 lbs / Torque: 50Nm (443 in/lbs)
  • Reach from rail: +/- 500 mm or 20 in
  • Recommended vertical stroke: 9.8 inches