Raptor Jaw and Housing Assemblies
Raptor jaw sets feature a pair of hardened tool steel movable jaws, pivoting in an aluminum housing. This combination forms a jaw and housing assembly that screws onto any of our three Power Cylinders.
Power is generated by jaw "rollers" gliding on the piston cam as it moves forward from the cylinder, closing the jaw set. The larger the power cylinder, the more power is generated.
- Jaws may be easily reversed in their housings, permitting left or right-hand operation.
- Jaws may be resharpened, depending on their wear.
- Replacement jaw sets may be ordered separate from aluminum housings; contact Kolver or your local representative.
- Specialty jaw sets may be engineered upon request; contact Kolver or your local representative
Raptor: Jaw and Housings |
|
|
|
Raptor: Jaw and Housings Raptor jaw sets feature a pair of hardened tool steel movable jaws, pivoting in an aluminum housing. This combination forms a jaw and housing assemb...
|
Recent Blog Posts
Mar 10, 2011
Cutting Edge Ergonomics with KolverUSA’s PLUTO Push to Start Tool
Dec 28, 2010
KolverUSA has Gone Social with Facebook and Twitter
Oct 15, 2010
KolverUSA Turns Heads at the ATExpo
Sep 14, 2010
KolverUSA’s Micro-Tool Screwdrivers-Efficient and Inexpensive
Jun 8, 2010
KolverUSA Releases Their 2010 Catalog
Featured Model
EDU1AE/TOP/LTP
EDU1AE/TOP/LTP
The EDU1AE/TOP/LTP "Low Torque" MultiTorque Inspector
This system allows parameters to be set up to control the torque and RPM profile for one program. The system is set up through a LCD display on the front of the unit. Changes to the parameters are preformed by scrolling through the settings using four buttons.
